Property Management Sign

 

83        (1)              A Property Management Sign may be attached to buildings or incorporated into Freestanding Identification Signs in all Districts.

(2)              A Property Management Sign may be freestanding only in accordance with the requirements of subsection (5), but must never be freestanding in low density residential districts.

(3)              When a Property Management Sign is attached to a building:

(a)        it must relate to the buildings on the site where the sign is located;

(b)        it must be parallel to the building and must not be on or under a canopy or painted directly on the building;

(c)        it must have a maximum sign area of 1.5 square metres, if the length of the building wall it is attached to is 30.0 metres or less;

(d)        it must have a maximum sign area of 3.0 square metres, if the length of the building wall it is attached to is greater than 30.0 metres; and

(e)        no part of the sign may be higher than 3.5 metres above grade.

(4)              When a Property Management Sign is incorporated into a Freestanding Identification Sign, it must not exceed the lesser of:

(a)        80.0 per cent of the sign area of the Freestanding Identification Sign; or

(b)        3.0 square metres.

(5)              A Property Management Sign may be freestanding only if there is no Freestanding Identification Sign on the site, or the Freestanding Identification Sign has no space for the property management information.

(6)              Where subsection (5) applies in a commercial, industrial or special purpose districts, the Property Management Sign must:

(a)        have a maximum sign area of 1.5 square metres and a maximum height of 2.0 metres above grade, if the site frontage is equal to or less than 30.0 metres; and

(b)        have a maximum height of 3.0 metres above grade, if the site frontage is greater than 30.0 metres.

(7)              Where subsection (5) applies in the residential districts, the Property Management Sign must:

(a)        have a maximum sign area of 1.0 square metre and a maximum height of 2.0 metres above grade, if the site frontage is equal to or less than 30.0 metres; and

(b)        have a maximum sign area of 3.0 metres and a maximum height of 3.0 metres above grade, if the site frontage is greater than 30.0 metres.

(8)              There must not be more than one Property Management Sign on any building wall or site frontage.