(a) means a use:
(i) where members of a club or group assemble to participate in recreation, social or cultural activities;
(ii) where there are sports, recreation, cultural, or social events for the members of the group;
(iii) where there may be an area for the preparation or consumption of food; and
(iv) that may have meeting rooms for the administration of the group;
(b) is a use within the Culture and Leisure Group in Schedule A to this Bylaw;
(c) must not have any openings, except emergency exits, loading bay doors or non-opening windows, on a façade that faces a residential district or abuts a lane separating the parcel from a residential district, or a C-N1, C-N2, C-COR1 District;
(d) must not have an exterior entrance located on a façade that faces a residential district, unless that façade is separated from the residential district by an intervening street;
(e) must not have a public area greater than 75.0 square metres where the use shares a property line with, or is only separated by an intervening lane from a residential district, or a C-N1, C-N2, C-COR1 District;
(f) requires 1.5 motor vehicle parking stalls per 100.0 square metres of gross usable floor area for non-assembly areas, and 1.0 motor vehicle parking stalls per four (4) person capacity of the largest assembly area in the building, which is calculated by one of the following methods:
(i) one (1) person per 0.75 square metres for areas of non-fixed seating;
(ii) one (1) person per individual fixed seat for areas where individual fixed seats are the primary method of accommodating people;
(iii) one (1) person per 0.5 linear metres of bench seating; or
(iv) the maximum capacity of the assembly area as stated in the development permit;
(g) does not require bicycle parking stalls – class 1; and
(h) requires a minimum of 1.0 bicycle parking stalls – class 2 per 250.0 square metres of gross usable floor area.