151 Auto Service – Minor

(a)        means a use:

(i)         where motor vehicles with a gross vehicle weight  equal to or less than 4536 kilograms are serviced and repaired in a building; and 

(ii)        where no more than three motor vehicles are capable of being serviced or repaired at a time;

(iii)       deleted

(b)        is a use within the Automotive Service Group in Schedule A to this Bylaw;

(b.1)     must not have more than 200 square metres of floor area designated for the servicing of motor vehicles, excluding areas used for administration and storage, which must be shown on the plan submitted for a development permit;

(c)        deleted

(d)        must not manufacture or re-manufacture auto parts for retail or wholesale distribution;

(e)        must orient any building on the parcel to minimize any potential adverse affects on adjacent uses;

(f)        must have service bay doors oriented away from an adjacent residential district;

(g)        must keep service bay doors closed, except when being used by vehicles to exit or enter the service bay;

(h)        must not have any vehicle exiting doors located within 23.0 metres of a residential district, when measured to the nearest property line of a parcel designated as a residential district

(i)         may have activities associated with the use, auto parts, equipment, scrap, and other materials located outside of a building, provided they are within a screened enclosure that must be:

(i)         shown on plans required at the time the application for the use is made;

(ii)        located where, in the opinion of the Development Authority, it is least likely to adversely affect neighbouring properties; and

(iii)       constructed of materials and to the standards required by the Development Authority;

(j)         must not keep vehicles outside of a building or screened enclosure for more than 72 consecutive hours;

(k)        requires a minimum of 2.0 motor vehicle parking stalls per 100.0 square metres of gross usable floor area;

(l)         does not require bicycle parking stalls – class 1; and

(m)      requires a minimum of 1.0 bicycle parking stalls – class 2 per 2000.0 square metres of gross usable floor area.