(a) means a use:
(i) where motor vehicles with a gross vehicle weight equal to or less than 4536 kilograms are serviced and repaired in a building; and
(ii) that is capable of servicing or repairing four or more motor vehicles at a time;
(iii) deleted
(b) is a use within the Automotive Service Group in Schedule A to this Bylaw;
(c) deleted
(d) must not manufacture or re-manufacture auto parts for retail or wholesale distribution;
(e) must orient any building on the parcel to minimize any potential adverse affects on adjacent uses;
(f) must have service bay doors oriented away from an adjacent residential district;
(g) must keep service bay doors closed, except when being used by vehicles to exit or enter the service bay;
(h) must not have any vehicle exiting doors located within 23.0 metres of a residential district, when measured to the nearest property line of a parcel designated as a residential district;
(i) may have activities associated with the use, equipment, scrap, auto parts and other materials located outside of a building, provided they are within a screened enclosure that must be:
(i) shown on plans required at the time the application for the use is made;
(ii) located where, in the opinion of the Development Authority, it is least likely to adversely affect neighbouring properties; and
(iii) constructed of materials and to the standards required by the Development Authority;
(j) must not keep vehicles outside of a building or screened enclosure for more than 72 consecutive hours;
(k) requires a minimum of 2.0 motor vehicle parking stalls per 100.0 square metres of gross usable floor area;
(l) does not require bicycle parking stalls – class 1; and
(m) requires a minimum of 1.0 bicycle parking stalls – class 2 per 2000.0 square metres of gross usable floor area.
47P2008, 67P2008, 71P2008, 44P2013, 29P2016