(a) means a use where motor vehicle bodies are repaired or painted;
(b) is a use within the Automotive Group in Schedule A to this Bylaw;
(c) must not be located within 20.0 metres of a residential district, when measured from the building containing the use to the nearest property line of a parcel designated as a residential district;
(d) must orient any building on the parcel to minimize any potential adverse affects on adjacent use;
(e) must have service bay doors oriented away from an adjacent residential district;
(f) must keep service bay doors closed, except when being used by vehicles to exit or enter the service bay;
(g) may have activities associated with the use, auto parts, equipment, scrap, and other materials located outside of a building, provided they are within a screened enclosure that must be:
(i) shown on plans required at the time the application for the use is made;
(ii) located where, in the opinion of the Development Authority, it is least likely to adversely affect neighbouring properties; and
(iii) constructed of materials and to the standards required by the Development Authority;
(h) must not keep vehicles outside of a building or screened enclosure for more than 72 consecutive hours;
(i) deleted
(j) deleted
(k) requires a minimum of 2.0 motor vehicle parking stalls per 100.0 square metres of gross usable floor area;
(l) does not require bicycle parking stalls – class 1; and
(m) requires a minimum of 2.0 bicycle parking stalls – class 2 per 2000.0 square metres of gross usable floor area.